The common interface type of F series connectors is quick plugging and unplugging, which is convenient to operate and suitable for scenarios requiring frequent connection and disconnection. In terms of operating frequency, they are mostly applied in low-frequency environments. However, some specially designed F series connectors can maintain excellent performance at higher frequencies. Their coaxial cables have a passband as low as 0Hz and as high as 2.15GHz (removed "at least" to avoid semantic repetition). They can also achieve outstanding 75Ω impedance matching at frequencies above 1GHz, with an available bandwidth of several GHz.
Contact Piece and Insulator Material
The contact piece is mostly made of gold-plated brass. Brass ensures good electrical conductivity and mechanical strength, while gold plating enhances corrosion resistance and contact reliability, reduces contact resistance, and improves signal transmission stability. The insulator is often made of PPS (polyphenylene sulfide), which has excellent high-temperature resistance, chemical corrosion resistance, and high insulation strength to ensure stable electrical performance in complex environments.
Core Count, Pin Count, and Wire Length
The core count ranges from 2 to 32, and the pin count is also 2 to 32. Users can flexibly select configurations according to actual needs to meet the signal transmission requirements of different devices and systems. The wire length can usually be customized to adapt to various installation spaces and connection distance demands.
Electrical Performance Parameters
The test voltage between pin cores can reach 0.95 kV rms, and the test voltage between the pin core and the housing is 1.50 kV rms. This reflects the connector’s excellent electrical insulation performance, which can effectively prevent electrical breakdown and ensure the safety of equipment and personnel.
Mechanical and Environmental Performance
The mechanical life exceeds 3,000 cycles, demonstrating excellent durability. In the vibration test, with a frequency range of 10–2000Hz and acceleration of 147m/s², the transient break is ≤1μs. During the impact test, at an acceleration of 490m/s² (corrected unit from "mm/s²" to "m/s²"), the instantaneous break remains ≤1μs, highlighting excellent anti-vibration and anti-shock capabilities. The operating temperature range is -20℃ to +105℃, and the relative humidity can reach 95% at 40℃. The protection level meets IP68/IP50, and some special models offer higher protection. A 72-hour salt spray rating indicates good corrosion resistance in harsh environments.